N-acyl sarcosine type corrosion inhibitor CAS:110-25-8

What is CMET SO?

CMET SO is N‑acyl Sarcosine type corrosion inhibitor, it is an efficient corrosion inhibitor, can be used for lubricating oils, greases, and fuel oils. It has good oil solubility, and it is efficient when mixed with CMET AO. It can be used in food‑grade lubricating oil formulations.

Features of CMET SO

• High efficiency corrosion inhibitor: Delivers efficient corrosion inhibition, especially used with CMET AO.

• Food‑grade applicable: Can be used in food grade lubricating oil formulas.

• Non‑corrosive to copper: Does not corrode copper and cause surface discoloration.

• Good oil solubility: Fully miscible with common lubricant base stocks.

Functions of CMET SO

• Corrosion inhibition: Provides efficient corrosion protection for lubricating oils, greases and fuel oils.

• Synergy with CMET AO: Highly efficient when mixed with CMET AO.

• Food‑grade compliance: Suitable for food‑grade lubricating oil formulations.

Applications of CMET SO

Industrial lube oil

0.03‑0.10% recommended treat level.

Grease

0.10‑0.50% recommended treat level.

Anti‑rust oil

0.50‑1.00% recommended treat level.

Gasoline, diesel

10‑50ppm recommended treat level.

Price of CMET SO

The price of CMET SO changes based on product grade, order volume and the supplier's pricing policy. To obtain accurate quotation details, kindly reach out to a trusted supplier or manufacturer directly. When assessing total costs, take note of its prominent advantages: CMET SO provides efficient corrosion inhibition with good oil solubility and no copper corrosion, improving equipment reliability and reducing maintenance workload under severe working conditions.

If you are sourcing CMET SO or would like to acquire further technical data, please do not hesitate to contact FansChem.

CMET SO FAQ

Q1: What is CMET SO and its main chemical composition?

A: CMET SO is an N‑acyl Sarcosine type corrosion inhibitor, CAS No.: 110‑25‑8. It is an efficient corrosion inhibitor for lubricating oils, greases and fuel oils.

Q2: What are the key physical‑chemical properties of CMET SO?

A: It is yellow to brown clear liquid. Typical data: density 0.94 g/cm³ (20℃), viscosity 350.0 mm²/s (40℃), open flash point ≥130.0℃, acid number 160.0 mgKOH/g, water 0.06%. Refer to the official TDS for complete index information.

Q3: What benefits does CMET SO bring and what is its recommended dosage?

A: It provides high efficiency corrosion inhibition, especially with CMET AO, can be used in food grade formulas, does not corrode copper and has good oil solubility. Recommended treat level: 0.03‑0.10% (industrial lube oil), 0.10‑0.50% (grease), 0.50‑1.00% (anti‑rust oil), 10‑50ppm (gasoline/diesel). Lab compatibility test is strongly required before formal blending.

Q4: What end‑use products is CMET SO suitable for?

A: Industrial lube oils, greases, anti‑rust oils, and gasoline/diesel fuel oils.

Q5: What are packaging and storage requirements for CMET SO?

A: Standard packaging is 50kg/200kg plastic drum (net weight). Store in a cool, dry and well‑ventilated warehouse.

Q6: What handling safety notes should I follow and where can I get TDS / SDS or quotation?

A: Avoid direct contact with skin, eyes and clothing. Follow standard industrial hygiene practices; always refer to the official SDS/MSDS for full safety guidance. For complete TDS, SDS or commercial quotation, please contact FansChem technical‑sales team directly.